INLINE Phresh Filter 2000 PRO,75cm,2000m3/hr,250mm

Technical data: filter housing: galvanized steel Open space: 53% Flange and base: aluminium Flange height: 45 mm Outer flange diameter: 250 mm Inner flange diameter: 248.4 mm Filter diameter: 291 mm Filter height: 750 mm Box dimensions: 304 x 304 x 795 mm Weight 11.1 kg Activated carbon - Type: granular - high activity - Australian RC48 Carbon bed depth: 40 mm Installation: vertical / horizontal Lifetime: 18 - 24 months Maximum operating temperature: 80 ? Maximum relative humidity: 80% Recommended maximum airflow: 1250 m3 / h Recommended maximum fan power: 1500 m3 / h Phresh Filters are odour filters that use the highest quality activated carbon available on the planet as the internal fill.It is mined in Australia in deposits that are several million years old.It is characterized by minimal dust and huge absorption capacity.Another huge advantage is their weight, which has gone down significantly due to the super quality of the activated carbon, which is really noticeable especially in filters with high air flow.The filter includes a dust filter (firon), which can be easily removed or put on the filter body.The manufacturer recommends to clean this dust filter every 3-6 months, wash it in lukewarm water and put it back on the filter body. Each Phresh Filter comes with 2 pieces. A super feature is the steel clamps that are fitted to the flange.When the air hose is subsequently mounted, attaching it with a steel clip or tape becomes a simple matter.The hose does not slip and attaching it is really a breeze. We must also mention that the used carbon can be recycled, for example in the garden, as it is a very good soil enrichment agent.... When carbon filter, only PHRESH FILTER !!!

Calculation to choose the right filter
Calculate the volume of air in a room by multiplying the length of the room (m) by the width of the room (m) and the height of the ceiling (m).
E.g.: Room 4 m long, 3 m wide and 2 m high ceiling => 4 x 3 x 2 = 24 m3
Multiply the resulting volume of air by 60 (i.e. the number of minutes per hour) to find the amount of air that needs to be purified in 1 hour.
Compare the result with the maximum output of the selected filter. If its max. performance is higher than our result, the filter is sufficient for the space.