Malapa AL28, Magnetic sensor for windows or doors (NO)

AL28, magnetic sensor for windows or doors (NO)
Monitoring of the room or switching of appliances with a magnetic sensor. The magnetic sensor consists of two elements. The magnet is usually mounted on the moving part of the device, the magnetic sensor on the fixed part. The magnetic field sensor contains an internal contact with a wire outlet. When the sensor is moved away from the magnet, the contact is disconnected (NO), when the sensor is brought closer to the magnet, the contact is connected (NC). The magnetic sensor is terminated with a cable for connection. The colour of both elements is grey. It does not need a supply voltage. The sensor can be glued or screwed with holes. Waterproof design of sensor and magnet. The magnetic sensor itself is designed for loads up to 10W, with higher loads requiring an auxiliary relay or contactor.

Magnetic sensor applications:
- magnetic sensor for securing windows, doors and other moving parts, control, monitoring status or position, controlling lighting or other appliances...

Location:
- magnetic sensor is usually mounted e.g... on the frame of a door or window, by gluing, screwing, into a hole
- the magnet is usually mounted on a moving part, e.g... of a door or window, by gluing, screwing, into a hole

Magnetic sensor dimensions:
- the dimensions of the magnetic sensor can be found in the product photo gallery

Magnetic sensor wiring diagram:
- the magnetic sensor wiring diagram can be found in the product photo gallery

Technical data AL28:
- contact type - reed
- switching contact - NO (open when moving away from the magnet)
- switching voltage - maximum 110V
- load - maximum 10W (0,5A)
- number of elements - sensor + magnet
- range - 11 to 16mm
- cable length - 360mm
- sensor colour - grey
- material - PVC
- working temperature -55° to +70°C
- size - length 29, width 18.8, height 6.9mm
- protection - IP67
- total weight - 15 grams