Ebb&Flow adhesive for soaking tubs, 300 ml

The high quality adhesive is designed specifically for Ebb&Flow soaking tubs. Volume 300 ml. Excessive use of the adhesive can damage the tubs.

Bonding must be carried out:
- at temperatures between 5-25 °C
- trays must be dry and kept in dry conditions during the curing process

Support for table trays:
- trays are designed to carry a maximum uniformly distributed load of 70 kg/m2.
The following criteria must be met:
- bench trays shall be supported with a gap of up to 500 mm.
- support should be located less than 70 mm from the edge of the glue.
- support should be located less than 200 mm from the edge of the bench tray. Note that the tub must not rest on the support beam

The support MUST be positioned under the part of the tray that contains the glue edge (see drawing).