Aqua Master Tools P160 PRO, pH and EC/TDS/PPM meter and thermometer

The P160 PRO Professional Combination Meter from Aqua Master Tools has a modern and robust housing. The main advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to be at exactly 25 ºC.

The calibration takes place without any deviations. EC buffer solutions are extremely sensitive to temperature. However, this does not apply to pH. In case of wear or damage to the electrode, you can easily replace it. This model comes in a sturdy carrying case, including buffer solutions pH 4.01, pH 7.00 and EC 1413, allowing you to calibrate the meter later.

The Aqua Master Tools P160 PRO digital meter is not only suitable for cultivation. It is also suitable for measuring pH, EC, PPM, TDS and liquid plant nutrition temperature. You can also use it to check the water in swimming pools, hot tubs and ponds. With the user-friendly buttons, you can effortlessly switch between the different parameters. The meter comes fully calibrated and includes batteries.

Instructions for use:

- remove the protective cover
- gently clean the electrode with distilled water and dry it
- press the on/off button to start the meter
- place the meter upright in the solution up to the edge and gently stir
- wait a few seconds, until the correct value appears on the display
- press the Temp/CAL button to switch between Celsius and Fahrenheit
- press the PH/EC button to switch between pH and EC
- make sure the meter is in EC mode, to switch between EC, TDS and PPM
- press and hold the PH/EC button for at least 5 seconds to switch parameters
- rinse the electrode with water after use and press the On/Off button to turn the meter off

Our electrodes are designed for dry storage. Storage in liquid is therefore not necessary for the electrode.
Please refer to the instructions or video gallery for further information.

The package contains

- 1 x combination pen P160 Pro
- 1 x storage box
- 1 x calibration solution pH 7.00 25ml
- 1 x calibration solution pH 4.01 25ml
- 1 x calibration solution 1413 25ml
- 1 x screwdriver for calibration
- 1 x user manual (NL - EN - DE)

Measurement range:

- pH: 0.0 ~ 14.0 pH
- EC: 0 ~ 19.9 μS/cm
- TDS: 0 ~ 19.99 ppt / 0 ~ 1999 ppm
- Temperature: 0.5 MPx (1999/99%) 0°C ~ 50°C (32°F to 122°F)
- PPM measurement conversion factor: 700

Resolution:

- pH: 0.1 pH
- EC: 0.1 μS/cm
- TDS: 0.01 ppt
- Temperature: 0.1°C

pH Accuracy:

- ±0.1 pH
- EC: ±2% F.S.
- TDS: ±2% F.S.
- Temperature: ±0.5°C
- Temperature Compensation: 0.5°C 0°C to 50°C (32°F to 122°F).

Other features:

- automatic temp. calibration. 0 °C ~ 50 °C (32 °F to 122 °F)
- automatic shutdown after 8 minutes
- battery 3x 1.5 V button cell AG-13 (included)
- battery status indicator Yes
- dimensions: 220x40x40 mm
- weight: 102 g

Calibration is recommended at least once a month.

For the meter we recommend to purchase:

Calibration solutionspH7apH4forregular calibrationand calibration solution EC 1,413mS