Aqua Master Tools P700 PRO2, pH and EC/CF/PPM meter and thermometer - new, tested only

New piece, once tested, full warranty.

The P700 Pro 2 Combination pH Meter has a modern, robust housing. It also features a large, clear display on which all readings can be taken. Improved software ensures that accurate readings can now be taken more quickly. The electrodes can be easily replaced if worn or damaged.

The P700 Pro 2 combination pH meter is ideal for measuring pH, EC, CF, PPM and plant nutrient water temperature in swimming pools, hot tubs and ponds. Use the easy to use buttons to easily switch between the different parameters. The meter is calibrated and comes with batteries.

Instructions for use:

- plug the power supply into the wall outlet and connect the USB connector to the meter
- connect the pH and EC electrode to the meter
- remove the protective cover from the pH and EC electrodes
- turn on the meter
- immerse the pH and EC electrodes in the liquid you want to test, and gently stir until the reading stabilizes
- press the C/F button to switch between Celsius and Fahrenheit
- press the MODE button to switch between EC/CF and PPM measurements
- turn the meter off after use
- clean the pH and EC electrodes with tap water, to minimize the possibility of contamination
- put the pH and EC electrodes back into the protective cover
- you can also use the meter continuously and leave the electrodes in the measured liquid
- then remember to calibrate them more frequently
- it is also important to check for algae build-up and clean the electrodes thoroughly if necessary

For more information, see the video gallery and the attached instructions.

Measurement range:

- pH: 0.0 - 14.0
- EC: 0.0 - 19.9
- CF: 0.0 - 199
- PPM: 0 - 19990
- Temperature: 0.0 - 50 °C

Resolution:

- pH: ±0.1
- EC: ±2% F.S.
- CF: ±2% F.S.
- PPM: ±2% F.S.
- Temperature: ±0.1 °C

pH accuracy:

- pH: 0.1
- EC: 0.1
- CF: 0.1
- PPM: 10
- Temperature: 0.1 °C

Other properties:

- ATC Yes
- 6 V DC power supply with replaceable battery
- automatic pH calibration: 2-point calibration 4.0 - 70
- EC: 1-point calculation 1.4 - 3.0 - 12.88
- calibration indicator: after one month

We recommend purchasing the following with the meter:

pH7 calibration solutionsapH4for regular calibrationand calibration solution EC 1.413mS