GSE Controller with LCD display for 2 EC fans - UNLOCKED

This is an unpacked piece that has never been in use.

This GSE controller switches the two EC fans depending on the temperature and humidity in the room to maintain a constant climate. Adjustable day and night modes allow different settings for when the lights are on and off.

The clear LCD display shows at a glance the current temperature, humidity, fan speed and whether the controller is in day or night mode. Three buttons can be used to set the minimum and maximum fan speed, ideal temperature, humidity and hysteresis for both.

The controller will switch between night and day mode when the light intensity reaches the value you set. It is also possible to set a delay between the two modes so that the controller does not switch if the sensor is accidentally covered for a moment. For example, you can set the controller to switch to night mode if the lights dim below 20% and remain so for three minutes.

With the controller, you get a sensor with a built-in light sensor that measures temperature and humidity. The sensor is on a four metre cable so that it can be placed further away from the controller.

A 3.5mm jack, terminal block or RJ45 connector is used to connect to the fans. The controller is compatible with most EC fans from brands such as Can-Fan, PrimaKlima or Carbon Active.

Setting options:
- Temperature: 15C° - 35C°, hysteresis 1 - 5C°
-Humidity: 0 - 100%, hysteresis 1% - 20%
-Min. speed (exhaust fan): off, 1 - 100%
-Max. Speed (exhaust fan): 10 - 100%
-Underpressure (exhaust fan): off, 0% to -50%
-Individual setting of the above for day and night mode
- Delay between day and night mode
- Signal: 0-10V or PWM (adjustable)

Package includes:
-GSE Controller with LCD display for 2 EC fans
-1x temperature and humidity sensor with light sensor (on 4m cable)
-2x fan connection cable, 4m (4pol. 3,5mm stereo jack)
-2x fan connection cable, 4m (with RJ45 reduction)
-2x fan connection terminal block
-1x power cable (12VDC, 100mA)
-1x double-sided Velcro for fixing the controller
-1x user manual

Parameters:
- dimensions: 61 x 98 x 20 mm
- voltage: 12V DC
- current: 35 mA
- weight: 2.5 kg
- degree of protection: IP 20

If you have any questions, please feel free to contact us at info@higarden.cz.