GSE Regulator w/ LCD Screen for 2 EC Ventilators

Product detailed description

This GSE regulator is only for ventilators with an EC engine. It regulates two EC ventilators depending on the temperature, humidity and day/night mode settings to maintain a stable climate in the room. 

The LCD screen shows the current temperature, relative humidity, ventilator speed and day/night mode at first glance. The settings adjust the minimum and maximum ventilator speed for both ventilators, ideal temperature, humidity and hysteresis. The shift into night mode is triggered by the light intensity, and the delay between the modes is pre-set - for example, the day ends when the lights dim to 20%, and the night mode starts after 3 minutes.

The regulator includes a sensor, which monitors light, temperature and humidity. The sensor is on a four-meter cable. The regulator connects with the ventilators using a 4pole 3,5mm jack on a four-meter cable, a terminal adapter or an RJ45 connector (compatible with Can-Fan, PrimaKlima and Carbon Active ventilators). The output signal is adjustable to 0-10V or PWM (pulse width modulation). 

The regulator can be powered by the ventilator if it has a 3-4 wire connection and provides a GND-VDC signal > 10V/35mA.

Settings:

Temperature: 15C° - 35C°, hysteresis 1 - 5C°
Humidity: 0 - 100%, hysteresis 1% to 20%
Minimum speed (outtake ventilator): off, 1 - 100%
Maximum speed (outtake ventilator): 10 - 100%
Negative pressure (intake ventilator): 0% to -50%
Separate settings for day and night mode
Day/night mode delay
0-10V or PWM output signal
Intake fan on/off

The package contains:
GSE Regulator w/ LCD Screen for 2 EC Ventilators
1x humidity, temperature and light sensor (4m cable)
2x 4m connecting cable for the ventilators (with 4pole 3,5mm stereo-jack)
2x 4m connecting cable for the ventilators (4pole 3,5mm stereo-jack to RJ45)
2x terminal adapter for the ventilators
1x power cable 12V DC, 100,mA
1x velcro adhesive tape for installation
1x user manual

Product details:
- dimensions: 61 x 98 x 20 mm
- voltage: 12V DC
- power: 35 mA
- weight: 2,5 kg
- protective cover rating: IP 20

If you have any questions, contact us at info@higarden.eu.