Malapa SI62 - 12V outdoor gear pump 0,6l/min.
Product detailed description
SI62, 12V outdoor gear pump 0,6l/min.
Outdoor portable pump designed for 12V DC. The unit can therefore be powered from a car battery, solar module or 230V/12V mains supply. The maximum flow rate of the pump is 0.6 litres/minute (36l/hr), self-priming maximum 0.6 metres. The pump is designed for e.g. petrol, methanol, coolant, water. Intermittent operation running at 12V maximum 10 minutes on and 30 minutes off. Maintenance free, idle operation (max 30 seconds). The pump is self priming up to 0.6 meters, it is best to connect a check valve or choose a mounting location that is higher than the water level. Right and left hand operation without loss of power. Power cord for connection of 1 meter length. The device operates with a safe voltage.
Pump application:
- pump for pumping and draining gasoline, methanol, coolant, other liquids...
Installation of the pump:
- the pump is intended for external use, the pump and piping must be protected from frost, the suction fluid should be protected by a filter against dirt, it is recommended to protect it with a fuse or circuit breaker
Technical data SI62:
- voltage - 12V DC (9V to 14V)
- power consumption - 7.2W to 17W (0.6A to 1.4A)
- flow rate - maximum 0.6 litres/minute (36l/hr)
- suction - maximum 0.6 metres
- self suction - yes
- hose connection - diameter 2,5mm
- liquid temperature - max +60°C
- operating mode - 10 minutes run/ 30 minutes pause
- material - plastic/ metal
- size - length 70mm, width 56mm, height 34mm
- inlet - soldering plate
- total weight - 135 grams
Additional parameters
| Category: | Submersible Pumps |
|---|---|
| EAN: | 4031656000928 |
| The item has been sold out… | |
