TD Mixvent 800/200 N 3V three-speed fan
Product detailed description
The TD-800 fan housing is made of plastic. The housing consists of a mounting rail with two throats and a motor which is connected to the throats by quick-release clips. The design allows the motor section to be removed without disconnecting the ductwork.
The motors of the TD- 500 to TD-2000 fans have triple windings. For triple winding motors (TD 500 - TD 2000) the speed is switched in three stages using COM 3 or INT 4P controllers or voltage change control can be used with REB (continuous control) or REV (five stage control) controllers. The terminal block is located on the fan housing.
The fans can be mounted in any fan position. The cabinet must not transmit mechanical stresses from the ductwork. A flexible connection to the ductwork must be used.
Parameters:
- air flow: 890/750/660m3/h
- speed: 2190/1870/1660 rpm
- duct diameter: 200 mm
- power: 103/93/88 W
- voltage: 230V
- current: 0,50/0,47/0,45 A
- max. temperature: -20 to +60 °C
- weight: 4,9 kg
Operating instructions here: TD manual
Catalogue with product information: TD catalogue
Dimensions (in mm):
*Drawing of the fan can be found in the photo gallery
Additional parameters
| Category: | TD Mixvent/Silent Ventilators |
|---|---|
| Flange (mm): | 200 |
| Speed Control: | No regulation |
| Technology: | Axial |
| Airflow (m3/h): | 800 |
