MTL1 - Digital Thermostat (heating or cooling)

Product detailed description

The Malapa MTL1 is a digital thermostat with an LCD screen for switching the connected heating/cooling device according to the room temperature. The thermostat automatically switches the connected appliance on or off to maintain a stable temperature according to the custom setting.

• 1. output socket:
  - controls the appliance according to the air temperature
  - the switch allows you to adjust the device to a heater (increases the temperature) or a cooler (decreases the temperature)

The optimal temperature is adjustable from -55°C to 120°C (the hysteresis can be set to 1°C -10°C). MTL1 has an acoustic alarm, which can alert you if the temperature deviates from the optimal range. The delay can be 0-60minutes. MTL1 includes a temperature probe (NTC thermistor) which allows calibration in a range from -10°C to 10°C. The maximum switched load is 3500W.

The clear LED screen displays the current and desired temperature. The settings can be backed up.  

Installing the thermostat is easy - it connects to an electric socket using a 3m long cable. It's possible to attach the thermostat to a wall.

• Using the thermostat:
  - the device can control heating or air-conditioning, ventilators, floor heaters and hot air distribution systems
  - suitable for households, workspaces, storage rooms, workshops and similar indoor spaces
• Main functions of the thermostat:
  - max. load of the connected appliance is 3500W
  - LED screen, 4 control buttons
  - NO and NC contact
  - temperature settings from -55°C to 125°C
  - hysteresis settings from 1°C to 10°C
  - lower and upper alarm settings range - from -55°C to 125°C
  - adjustable delay 0-60 minutes
  - calibrating in a range from -10°C to 10°C
  - temperature sensor on a 1 meter cable
  - 3-meter power input cable
  - attaches to a flat surface or a wall
  - simple and quick installation
• Advantages:
  - saves settings even during a power outage
  - quick settings changes and precise measurement of all quantities
  - small energy consumption
  - stable temperature without fluctuations
  - maintains a pleasant climate
  - saves energy - turns the appliance on only when it's necessary
• Installation:
  - the sensor can measure temperature in a different room or directly in the ventilation
  - we recommend placing the sensor about 1,5m above the ground, in a place with sufficient air circulation
  - the sensor shouldn't be in the vicinity of a heater or cooler
  - the device has a built-in handle 
• Hysteresis:
  - sets the temperature difference when the appliance turns on/off
  Example 1 - Heater: If the hysteresis is set to 1°C and the optimal temperature to 20°C, the thermostat turns the heater off at 21° and turns it on at 20°C.
  Example 2 - Cooling: If the hysteresis is set to 1°C and the optimal temperature to 20°C, the thermostat turns the cooling off at 19°C and turns it on at 20°C

MTL1 Specification:

- power input - 230V, 50Hz
- max. load - total resistive load 3500W, 15A
- temperature sensor - resistive, type NTC (10 kOhm),
- temperature sensor cable - 1m long
- sensor size - diameter 4mm length 20mm
- 1. socket - output - heating/cooling (normally closed and normally open contacts)
- LED screen
- control button - 4x
- output - heating/air-conditioning (NO/NC)
- temperature setting range - from -55°C to 125°C
- temperature hysteresis setting range - from 1°C to 10°C
- temperature accuracy - ±1%
- temperature units - °C/°F
- lower acoustic alarm setting range - from -55°C to 125°C
- upper acoustic alarm setting range - from -55°C to 125°C
- delay - 0 to 60 minutes
- sensor calibration: from -10°C to 10°C
- data back-up
- electronic protection
- power input cable - 3 m
- can be attached to a wall or a flat surface
- weight - 1,1kg
- dimensions - 19,5x14x10cm
- operating temperature: from 0°C to 60°C
- operating humidity: 0%-90% RH (non-condensing)
- storing temperature - 0°C to 45°C
- ingress protection - IP40
- material - ABS
- RoHS

If you'd like to customise the product (menu language settings, cable lengths, switched loads, etc.), contact us at info@higarden.eu. We can place an individual order with the manufacturer and adjust the product to your exact needs.