Trolmaster Water Detector-Monitor (WD-1)

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor a floor or room for the presence of water as a leak detector. Second, the WC-1 can be used as a water monitor. In this method of use, the water detector is placed in a location where water runoff will accumulate (or where water is entering the growing medium). Each outlet (solenoid or pump) on the Aqua-x system can be "assigned" to a specific WD-1. Each time a solenoid or pump assigned to a WD-1 is activated by the Aqua-X system, the WD-1 must detect water during a configurable delay period. If water is not detected (pump or solenoid failure), Aqua-x will send a user alert with a "irrigation failure" notification. Up to 25 WD-1 devices can be connected to a single Aqua-X.

Use two water detectors (WD-1/2) to activate the new auto fill feature on the Aqua-X Pro. One water detector will be located at the bottom of the nutrient tank and one at the top of the tank. When the liquid level drops below the bottom sensor, the Aqua-X Pro will activate the solenoid or pump and the tank will refill to the sensor at the top.

*The WD sensors can only detect leaks from municipal water, well water, or nutrient-laden water. Reverse osmosis/RO water may have such a low dissolved solids content that the water detector will not be able to detect RO water leaks.

Package includes:

• 1 x Water Detector
• 1 x Touch Spot
• 1 x RJ12 T-Splitter
• 1 x 16ft RJ12 Cable