TD Mixvent 2000/315 3V three-speed fan

The TD-2000 cabinet is made of galvanized steel sheet coated with epoxy lacquer. The enclosure consists of a mounting rail with two throats and a motor which is connected to the throats by quick-release clips. The design allows the motor section to be removed without the need to disconnect the pipework. The motors of the TD- 500 to TD-2000 fans have three windings. The terminal block is located on the fan casing and on some types contains a start-up capacitor.
For triple winding motors, the speed is switched in three stages by means of COM 3 or INT 4P controllers, or voltage change control by means of REB (continuous control) or REV (five stage control) controllers can be used.

The fans can be mounted in any fan position. The enclosure must not transmit mechanical stresses from the ductwork. A flexible connection to the ductwork must be used.

Parameters:
- air flow: 1830/1630/1430^m3/hr
- speed: 2630/2420/2130 rpm
- duct diameter: 315 mm
- power: 290/223/173 W
- voltage: 230V
- current: 1,03/0,79/0,64 A
- protection: IP44
- max. temperature: -40 to +60 °C
- weight: 14 kg

Operating instructions here: TD instructions
Catalogue with product information: TD catalogue

Dimensions (in mm):

*Drawing of the fan can be found in the photo gallery