TD Mixvent 6000/400

The TD-6000 cabinet is made of galvanized steel sheet coated with epoxy paint. The enclosure consists of a mounting rail with two throats and a motor which is connected to the throats by quick-release clips. The design allows the motor section to be removed without disconnecting the piping.
TD-4000 and TD-6000 motors have one winding and can be regulated by changing the voltage. The motor is equipped with thermal protection.
TD 4000 and 6000 can only be regulated by changing the voltage.
The terminal block is located on the fan housing, some types include a start-up capacitor.

The fans can be mounted in any fan position. The cabinet must not transmit mechanical stresses from the ductwork. A flexible connection to the ductwork must be used.

Parameters:
- air flow: 5310/4860/4440/3580^m3/h
- speed: 1400/1320/1210/960 rpm./
- duct diameter: 400 mm
- power: 680/577/530/453 W
- voltage: 230/170/140/115 V
- current: 2.92/3.24/3.66/4.06 A
- noise level: 44 db(A)
- protection: IP54
- max. temperature: -40 to +40 °C

Operating instructions here: TD instructions
Catalogue with product information: TD catalogue

Dimensions (in mm):

*Drawing of the fan can be found in the photo gallery