TR60 - Frequency Regulator 1500W

Product detailed description

The TR60 is a frequency regulator for inductive and resistive loads of up to 1500W (8A). It increases and lowers the output voltage by adjusting the frequency in a range from 0,1 to 400Hz. The frequency regulator can control an asynchronous electro-engine with a capacitor start or a Y-Δ engine.

The device is controlled by the potentiometer on the device or externally. You can set the connected device to run at 120% power temporarily. There are 8 pre-set speeds. 

All the necessary information is displayed on the LCD screen. 

The TR60 is protected against overload, overheating, undervoltage, overvoltage and short-circuiting.

Applications:
- regulating the speed of an engine, electromotor, saw, lathe, cement mixer, fans, drills and other heavy-duty machinery. It can regulate axial, radial and diagonal engines/motors.

Functions:
- regulates single-phase, asynchronous and synchronous engines
- the output voltage by adjusting the frequency in a range from 0,1 to 400Hz
- regulator/dimmer for inductive and resistive loads of up to 1500W
- settings on the device keyboard/potentiometer or externally (using voltage or current)
- turn on/off time adjustable from 0,1 - 6000 seconds
- 1x analogue programmable output 
- 2x numerically programmable output 
- 5x numerically programmable input
- 8x basic speeds

TR60 Specification:
- power input: 230 V (200...230V) AC 50 Hz
- max. load: 1500 W (8A)
- regulation: step-less
- output voltage regulation: 0% - 120%
- start/run time: 0,1 - 6000 seconds
- output frequency: 0,1 Hz - 400 Hz
- control: keyboard, buttons, potentiomete
- sped control input: 0 V to 10 V, 4 mA to 20 mA, 0 mA to 20 mA (speed input by turning the signal)
- additional outputs: 1x analogue programmable, 2x numerically programmable
- additional inputs: 5 numerically programable
- voltage output: 0 V to 10 V
- frequency output accuracy: 0,01 %
- protection against: overload, overheating, undervoltage, overvoltage and short-circuiting
- power cable length: 3 m
- connection: screw terminal (inside the device)
- cooling: forced air
- installation: wall-mounted, flat surface
- total weight: 2680 g 
- dimensions: 153 x 140 x 139 mm
- operating temperature: -10° to 40°C
- ingress protection: IP20
- case: ABS
- RoHS